Spectrum Analyzer Hsa870 9kHz to 7.5GHz Spectrum Analyzer

• Condition: New
• Product Name: 7.5GHz Specstrum Analyzer
• Frequency Range: 9kHz~7.5GHz
• Transport Package: Standard Packing
• Specification: 36*22*26cm
• Trademark: Onefind
• Model NO.: Hsa870
• Origin: China

Product Description

Product Description

 

HSA870 handheld spectrum analyzer, it is light and portable, fast and accurate, rugged, and has a wealth of measurement functions.
The product adopts a high-brightness 6.5-inch large screen with dynamic appearance and clear picture. Large capacity rechargeable
battery, continuous working time up to 4 hours.

Built-in tracking source, pre-amplifier, field strength measurement, audio
demodulation and high-resolution bandwidth and other optional accessories can quickly and reliably solve a variety of routine
measurement tasks. Universal USB and LAN communication interface can realize remote control.

Omnidirectional antenna

 

directional antenna

 

VB30 VSWR Bridge 10MHz -3600MHz

 

UP 60 PM 10MHz -6GHz

 

Frequency range: 9kHz ~ 7.5GHz
Good sensitivity: better than -150dBm
Resolution bandwidth: 1Hz ~ 3MHz
Dedicated transient detection to quickly capture transient signals
lWaterfall chart, modulation quality analysis, audio demodulation and other conventional and extended functions
Field strength measurement, S11 and S21, channel measurement, frequency counting and more professional options
lPass-Fail and other field detection and alarm capabilities
Full charge up to 4h, ready to connect at any time

Specification

 

 

 

 

The given technical specifications are applicable to the following conditions: preheating for 30 minutes, while the instrument is within the calibration cycle and has performed self calibration
model	HSA830	HSA870
Frequency range	9 kHz~3.6GHz	9kHz~7.5GHz
Frequency reading accuracy	± (frequency scale reading × Frequency reference accuracy+1% × Sweep width+10% × Rbw+0.5 × [scan width/(scan point-1)]+1hz
Internal benchmark (10MHz)	Aging rate	<1ppm/ year
	Temperature drift	<0.5ppm   (15ºC - 35ºC)
resolution bandwidth(RBW)
Range (<10Hz as an option)	1Hz to 500kHz (in continuous steps of 1 to 10), 1MHz, 3MHz
selectivity(60dB/3dB)	RBW≤500kHz	<5:1Typical values (digital implementation, close to Gaussian shape)
accuracy		<5% Typical value
video bandwidth(VBW)	10Hz  to 3MHz
Display average noise level (1Hz resolution bandwidth, RF attenuator 0dB)
Pre amplifier off	1MHzto10MHz <-130dBm 10MHzto1GHz <-135dBm 1GHzto3.6GHz <-130dBm	1MHzto10MHz <- 125dBm 10MHzto GHz <- 133dBm 3.4GHz <-130dBm 3.4GHzto 5GHz <-133dBm 5GHz to 7.5GHz <-127dBm
Pre amplifier on	1MHz to 10MHz <-150dBm 10MHzto 1GHz <-155dBm 1GHz to 3.6GHz <-148dBm	1MHzto10MHz <- 140dBm 10MHzto 3.4GHz <-143dBm 3.4GHz=5GHz <-145dBm 5GHzto 7.5GHz -138dBm
phase noise
fc=500MHz	-90dbc/hz when frequency offset is 30kHz	-80dbc/hz at frequency offset of 30kHz
	-100dbc/hz when frequency offset is 100kHz	-90dbc/hz at frequency offset of 100kHz
	-110dbc/hz at frequency offset of 1MHz	-110dbc/hz at frequency offset of 1MHz
Scan time
Nonzero sweep width	3ms to 3000s
Zero sweep width	1ms to 3000s
SCAN	Once or Continuous,
trigger
Trigger Source	Free, video, external
External trigger level	5V TTL  level, nominal value
frequency counter
Counting resolution	1Hz,10Hz,100Hz,1kHz
Counter uncertainty	Frequency reading × Frequency reference accuracy+counting resolution
Amplitude accuracy (20ºC to 30ºC)
Comprehensive amplitude accuracy(90%)		±1.5dB

 

amplitude
measuring rangefc≥10MHz	Display average noise level to+27dbm	Display average noise level to+20dbm
Maximum safe input level	+27dBm	+23dBm
Maximum DC input voltage	50Vdc	50Vdc
Input attenuator range	0 to 39dB,Step is 3dB	0 to 30dB,Step is 1dBB
1dB compression point	+7dBm	+10dBm
Spurious and residual response
TOI(Third-order distortion)	>30MHz	+13dBm
SHI(Second-order distortion)	>10MHz	+30dBm
Input related spurious signal		<-60dBc
Remaining Response		<-85dBm
Tracking signal source (option)
Frequency range	100kHz - 1.5GHz	100kHz -3.2GHz
output power	-30dBm-0dBm Step is 1dB	-30dBm-0dBm Step is 1dB
Flatness output	±3dB	±3dB
input/output
RF input/output	N-type negative(50Ω)
USB	Device end: USB 1.1 B connector Main control end: USB 2.0 A connector
LAN	10/100 Base-T, RJ-45 connector
FM/AMAudio demodulation	Speaker and headphone jack
Reference input/output	10MHz,BNC N Female	Input power from 0dBm to+10dBm
		Output power 0dBm ± 2dB
External trigger input	5V TTL level (±10V,100mA max)
parameters
monitor	TFT LCD,6.5inch
weight	Less than 2.8kg
Size	288 * 182 * 142mm
Working temperature	0ºC to 50ºC
Storage temperature	-20ºC to +70ºC
battery	7.4V 6600mAh
ac adapter	input	100V~240VAC 50/60Hz 1.5A
	Output	+9V 4000mA
Power Consumption	13W	15W

Company Profile

 

1. Beijing W&F technology Co.,LTD is founded in 2006.We locate in Beijing- the capital of China. More than 15 years professional experience in fiber optic euqipments field makes us pay more attention to the quality.
2. Our brand ONEFIND are selling all over the world.
3. Life long technical support, quick feedback to any problem.
4. We can also provide OEM service.
5. "Satisfaction of the clients is service standard" --is our marketing service strate.