WF164A V-Goove Bare Fiber Alignment Optical Fiber Aligner Digtail Alignment Tool

Product Description

Product Description

 WF164A v-goove bare fiber alignment optical fiber aligner digtail alignment tool

Features:

1.Suitable for laboratory testing, optical cable manufacturer quality inspection, outdoor construction testing

2.For fiber length, event point, loss detection

3.Simple operation, stable loss, follow-up test

4.Fast core, easy to change core, no delay in measurement progress

 

Product Deatils:

  The WF-160A fiber alignment device is mainly used for the coupling of fiber and fiber in fiber testing, experiment and construction. The utility model has the advantages of simple structure, reliability and convenient operation. Performance indicators have reached the level of similar foreign products.

  The alignment device uses V-groove positioning technology to make the two fibers collimate and the loss is less than 0.5dB (same-mode single-mode fiber). Two adjustable positioning seats accommodate a wide range of coated fibers.

 

Technical parameter:

Connecting method	Temporary coupling
Fiber diameter	250μm  900 µm
Fiber cladding diameter	125µm
Operating Temperature	-10~40
insertion loss	<0.5dB(Same SM optical fiber)
Requirements of fiber	Neat end face, smooth
Size	120mm×75mm×62mm
Weight	480g(without fiber clamp)

 

Package includes: 

 v-goove alignment device, fiber clamp and matching oil  

 

Operation

1.Connect the connector to the unit on the instrument to be tested under light source.

2.Rotate the knob to adjust the aligner's active end to the farthest position.

3.Connect the end of the tested pigtail FC to the tester.

4.Prepare the fiber end face:

First use the fiber stripper to strip the coating layer of the fiber to be connected by about 40mm,Wipe the dirt of the bare fiber with a cotton ball dipped in absolute alcohol.Put it into the clamp.Cut the fiber with a fiber cutter, and the bare fiber length is 5 mm.

5.Place the fiber:

Place the prepared bare fiber into the left half V-groove to fix the clamp at the specified position, and then make another bare fiber according to step 4,into the left half V-groove.Then drop a little matching oil into the V-goove,then put down the intermediate platen.

6.Testing:

Rotate the knob counterclockwise to allow the movable end to move freely to make the fiber in the V-groove automatically dock, and then observe the test instrument to test the indicators of the device under test.

Attention:

1.Do not use hard objects to collide and scrape the precision V-groove to avoid damage to the tank. The V-groove and indenter must be cleaned with absolute alcohol for each use.After use,wipe the matching solution on the V-groove and the indenter with alcohol, then clean the broken fiber and debris on the machine and store it in a dust-free state.

2.Non-professionals are not allowed to disassemble this product. If there is any malfunction, please contact our after-sales personnel in time.

3.This equipment can only be cleaned and maintained with cotton balls and alcohol, so do not use air guns to clean!

After Sales Service

1.What's the warranty for your products?

----Normally it is 1 years.

 

2.What's the lead time for all the goods that I required?
----About the 3-4 working days after getting payment.

3.What's your payment term?
----It is 100% T/T in advance or west-union.

4.What's the MOQ for your products?
----1pcs is okay.

5. How will you ship to us ?
----Normally it will takes 3-5 days by DHL or FedEx. 
 

Our company

     Beijing OneFind Technology Co.,Ltd was established in Beijing, the captical of  China in 2006. Ten years professionally engaged in integration and detection of optical communication network. OneFind becomes one of the biggest company in optical fibre testing field.

     Most of our products are exported into North America,South America,Eastern Europe, Asia, Afica,Western Europe and so many other countries.

     Holding the principle of "Customers first,Service foremost",we pledge to supply our customers with high-quality products and the best services. Experience ,profession, and a commitment to superior customer will be the reasons you choose OneFind. We always think win-win situation is the best policy in business. Welcome to join us. Our advantages:

    1. More than 10 years professional work experience in fiber optic equipments field.

    2. We have sales and after sales departments with several engineers,can help our customers deal with their problems in time.

    3. Our company have cooporation with many international companies such as  MECI,HUAWEI. 

    4. We also provide other advice and services,such as OEM and ODM.

    5. Our service is avaliable for 24 hours a day.