| Customization: | Available |
|---|---|
| Condition: | New |
| Frequency Range: | 30-6000MHz |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
onefind 5G handheld spectrum analyzer 30mhz-6Ghz Frequency spectrum analyzer portable
Features:
l5-inch super large HD large screen display
lMeasurement mode: real time spectrum, spectrum waterfall diagram, spectrum thermodynamic diagram
lMeasurement index: frequency, receiving power, vernier positioning, thermal display
lFrequency: 30mhz-6ghz continuously adjustable
lPower: - 135-25dbm (30m-1.4ghz)
l-128 ~ -20dBm(1.4G~4.4GHz)
l-120 ~ -10dBm(4.4G~6GHz)
lRBW:3,10,20,50,100,200,500kHz
lStandard interface: sma-k female, MINIUSB
lOptional: USB serial port, GPS, TF Card
Product Description:
The frequency of the spectrometer can continuously cover 30m ~ 6GHz, with high sensitivity (up to - 132dbm @ 3kHz RBW), 5-inch high-definition display screen, built-in large capacity 4800mAH battery, light weight, portable and equipped with a suitcase at the performance site. It is applicable to wireless environment monitoring, image transmission, wireless AP, walkie talkie, wireless microphone frequency band test and other applications (compatible with global wireless live transceiver frequency band test) of live broadcast of large events. Built in real-time spectrum, waterfall diagram, thermal diagram display mode, with knob (top rotary encoder, press to confirm) and button operation simple.
Scope of application:
1. The application of operators can cover all sub-6g frequency bands, including all the frequency bands of 5g communication recently established (for specific frequency band allocation, please refer to the provisions of the radio committee or the frequency bands of operators).
2. In the field of industry , it can be used as exercise and battlefield electromagnetic evaluation, technical investigation, communication, radar, RF unit measurement and maintenance, etc.
3. In the field of live video, it can test live image transmission, wireless AP and walkie talkie, effectively avoiding interference sources.
4. In the field of radio and television application, it can be used as a monitoring tool for cable closed-circuit television signal, as well as for FM radio station, emergency frequency band and black broadcast.
7. In the field of UAV, such as industry UAV Communication and interference test, consumer UAV signal test.
8. In the field of wireless audio, such as stage, concert and evening party, set microphone frequency planning, signal attenuation of RF cable, channel interference and signal coverage.
9. In the research, development, production and testing fields of the Internet of things, such as gateway and wireless module measurement, remote control, walkie talkie, wireless toys, etc.
10. In the field of on-board equipment, such as wireless vehicle key evaluation, on-board wireless equipment, tracker detection, vehicle electromagnetic interference and shielding test, and test tools of vehicle networking v2x.
11. Indoor subsystem: it can be used for indoor antenna distribution system test, wired test or wireless test.
12. Smart campus: it is used to test whether RFID wireless transceiver occupies the frequency band of government and enterprise units such as China Mobile Unicom Telecom, so as to avoid complaints caused by the same frequency interference.
Specifications:
|
Category |
Parameter introduction |
|
Frequency range (MHz) |
30~6000MHz |
|
Power error |
Not more than 0.9db (30MHz ~ 3GHz, after calibration) No more than 1.5dB (after full frequency calibration) |
|
RBW(kHz) |
3,10,20,50,100,200,500kHz |
|
DANL(Mean bottom noise,3kHz RBW) |
-128dBm@3kHz RBW -134dBm@3kHz RBW |
|
Normalized bottom noise |
-164dBm/Hz -165dBm/Hz |
|
Vertical accuracy |
+-1dBm |
|
Linear range of signal measurement |
-135 ~ -25dBm(30M~1.4GHz) -128 ~ -20dBm(1.4G~4.4GHz) -120 ~ -10dBm(4.4G~6GHz) (larger signal plus attenuator access) |
|
Maximum scanning time of each point |
1ms(RBW=500kHz) |
|
Refresh rate |
Up to 8Hz (refresh 8 screens per second) |
|
Center and scan width settings |
Support |
|
Marker |
Support |
|
Peak automatic detection |
Support |
|
MAXHOLD |
Support |
|
Reference level adjustable |
Support |
|
Waterfall Plot |
Support |
|
Thermodynamic chart |
Support |
|
Built in RTC clock |
Support |
|
Sleep time settings |
Support |
|
Language |
English, simplified Chinese, traditional Chinese |
|
Liquid crystal resolution |
TFT 800×480 |
|
LCD brightness setting |
Support |
|
Liquid crystal size |
5 inches |
|
RF interface |
SMA-K female head |
|
Battery capacity |
4800mAH (typical) |
|
Battery type |
Panasonic 21700 lithium battery |
|
Charging time |
4~5 hours |
|
Adapter specifications |
5V / 2A (convenient for the use of power bank) |
|
Charging interface |
Micro USB interface |
|
Communication data interface |
Micro USB interface (internal actual UART serial port) |
|
Battery supply time |
5~6 hours |
|
Physical size |
135mm * 101mm * 30MM (excluding knob and antenna height) |
Similar product:
10MHZ-2700MHZ
){kind=link}