Customization: | Available |
---|---|
Type: | Tdr |
Condition: | New |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
WF-602 VDSL2 Tester (ADSL2+/VDSL2/OPM/ VFL/TDR )
WF-602 VDSL Tester:
1.Optical Power Meter (Optional)
2.Visual Fault Locator (Optional)
3.Tone Tracker (Optional)
4.TDR Cable Fault Locator (Optional)
WF-602 VDSL tester specially designed for xDSL line test (xDSL include: ADSL, ADSL2, ADSL2+, READSL, VDSL2 etc) and maintenance It provides xDSL test, PPPoE dial test, DMM test, Modem emulation, line voltage indication and so on.
WF-602 VDSL Tester also introduces the Optical Power Meter and Visual Fault Locator function into the unit, as well as the TDR function;
It is one multifunction tester with smart size, true color LCD and powerful management software as well as the 6600mah rechargeable battery etc
3. Functions
ADSL2+ | |
Standards | ITU G.992.1(G.dmt),ITU G.992.2(G.lite),ITU G.994.1(G.hs), |
ANSI T1.413 issue #2,ITU G.992.5(ADSL2+)Annex L | |
Up channel rate | 0~1.2Mbps |
Down channel rate | 0~24Mbps |
Up/Down attenuation | 0~63.5dB |
Up/Down noise margin | 0~32dB |
Output power | Available |
Error test | CRC, FEC, HEC, NCD, LOS |
Display DSL connect mode | Available |
Display channel bit map | Available |
ADSL | |
ITU G.992.1 (G.dmt), ITU G.992.2(G.lite) | |
Standards | ITU G.994.1(G.hs), ANSI T1.413 Issue # 2 |
Up channel rate | 0~1Mbps |
Down channel rate | 0~8Mbps |
Up/Down attenuation | 0~63.5dB |
Up/Down noise margin | 0~32dB |
Output power | Available |
Error test | CRC, FEC, HEC, NCD, LOS |
Display DSL connect mode | Available |
Display channel bit map | Available |
VDSL2 | |
Be compatible with ADSL2+, ADSL standard. | |
DSL line attenuation | |
DSL line noise margin | |
DSL line up/down channel speed (Inter/Fast mode) | |
DSL line up/down maximum rate | |
DMT sub channel bit number: 0~15, and each sub channel frequency points | |
DSL line error number (CRC, HEC, FEC, LCD, OCD) | |
DSL line local output power | |
DSLAM information | |
Error Code Second | |
Impulse Noise Protection (INP) | |
DMM Test | |
DC voltage (V): | 0~400 |
AC voltage (V): | 0~400 |
Loop resistance(Ω): | 0~20000 |
Capacitance (nF): | 0~1000 |
Insulation resistance (MΩ): | 0~50 |
Optical Power Meter ( Optional) | |
Measurement range: | -70~+10dBm |
Wavelength | 850nm,1300nm,1310nm,1490nm,1550nm,1625nm |
Visual Fault Locator (Optional) | |
Output Power | 1mw |
Wavelength | 650nm ± 20nm |
Tone Tracker (Optional) | |
With supplied accessories, it can do cable tracing and find the trend of the lines | |
TDR Function (Optional)-Auto Test the cable fault distance (Cable Break/ Cable Mix) | |
Test Range | <2.5km |
Dead Zone | <1m |
Resolution Rate | 1m |
General Specification | |
LCD | 800x480 TFT |
Power supply | Internal Rechargeable 6600mAH Li-ion battery |
Battery Duration | 4 to 5 hours |
Working temperature | 0-40 oC |
Working moisture | 5%-90% |
Dimensions | 170mm×70mm×52mm |
Weight: | <0.6kg |
Support 7 VDSL2 profiles: profile 8a, 8b, 8c, 8d, 12a, 12b, 17a |