| Customization: | Available |
|---|---|
| After-sales Service: | 1 Year |
| Function: | Signal and Spectrum Analyzer |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Real-Time Spectrum Analyzer(5kHz~8GHz)
The RSA series spectrum analyzer is a broadband, high-performance portable real-time spectrum analyzer that measures frequencies ranging from 5kHz to 26.5GHz, making it suitable for both indoor and outdoor environments.
The product adopts a 10.1-inch LED backlight high brightness display screen. Equipped with real-time spectrum, swept frequency spectrum, vector network analysis, antenna and feeder line measurement, field strength measurement, USB power measurement, interference localization and demodulation analysis measurement modes, making it convenient for users to diagnose and solve various RF measurement problems on site. The medium mirror frequency suppression of up to 80dB and minimal residual response indicators meet the higher requirements of wireless monitoring. The product testing function is very comprehensive, battery powered, and convenient to carry. It is a powerful tool for on-site testing parameters, engineering installation and debugging, and daily maintenance and repair of various electronic devices. It can be widely used in various fields such as communication, broadcasting and television, radio management, electronic detection and countermeasures, precise guidance, and is also the best choice for university teaching.
| Working Mode | RSA080 | RSA200 | RSA260 |
| Scanning Spectrum Analyzer | √ | √ | √ |
| Real-time spectrum | √ | √ | √ |
| Vector network analyzer | √ | × | × |
| Distance To Fault | √ | × | × |
| Field Strength | √ | √ | √ |
| Emitter location | √ | √ | √ |
| Analog Demodulation | √ | √ | √ |
| USB Power meter | √ | √ | √ |
The technical indicators are suitable for the following conditions:The instrument is within the calibration cycle,store for at least two hours in a temperature environment between 10ºCand 30ºC,and preheat for30 minutes.
Real-Time Spectrum Analyzer
| Product Model | RSA080 | RSA200/RSA260 |
| Frequency range | 5kHz~8GHz | 9kHz~20GHz/26.5GHz |
| Frequency accuracy | 1ppm | 0.5ppm |
| Real-time bandwidth | 40MHz | |
| Minimum signal duration with 100% amplitude accuracy | 7us | |
| SSB Phase noise | 98dBc/Hz@10kHz(1GHz carrier) | 95dBc/Hz@10kHz(1GHz carrier) |
| Window types | Hanning,Blackmann-Harris, Rectangular, Flattop, Rectangular, Kaiser, Gaussian | |
| Maximum Sample Rate | 51.2MHz | |
| Display mode | Density, Spectrogram, Power vs. Time | |
| Trigger Mode | External , Level, PPS,FMT | |
| Product Model | RSA080 | RSA200/RSA260 |
| Frequency range | 5kHz~8GHz | 9kHz~20GHz/26.5GHz |
| Resolution bandwidth | 1Hz~5MHz | |
| Optimal Noise level | -165dBm | -162dBm |
| Sweep time | 20us~3000s(zero span),5ms~3000s(Non zero span) | |
| Overall amplitude accuracy | ±1.5dB | 1MHz ~ 13.5GHz ±1.5dB 13.5GHz ~ 20GHz ±2.0dB 20GHz ~ 26.5GHz ±2.5dB |
| Input attenuator | 30dB,1dB step | 30dB,2dB step |
| Image frequency / IF rejection |
80dB/80dB(typ.) | 70dB/60dB(typ.) |
| Product Model | RSA080 |
| Frequency range | 100kHz ~ 8GHz |
| Measure parameters | S11,S21 |
| Output Power Range | 0dBm,30dB adjustable |
| IF bandwidth | 1kHz~200kHz |
| Display mode | Return loss/VSWR, Insertion loss, Smith, Phase, Group delay |
| Corrected Directivity | ≥38dB(1MHz~8GHz) |
| Dynamic Range | 80dB(S21,10kHz RBW,Log mag,Average=50,>10MHz,typ.) |
| Product Model | RSA080 |
| Frequency range | 100kHz ~ 8GHz |
| Measurement points | 101 ~ 2048 |
| Corrected Directivity | ≥38dB(1MHz~8GHz) |
| Product Model | RSA080 | RSA200/RSA260 | |
| Frequency range | 2MHz~8GHz | 2MHz~20GHz/26.5GHz | |
| AM Demodulation | Modulation Rate Range | 20Hz~100kHz | |
| Modulation Rate Accuracy | Modulation Rate < 1 kHz 1 Hz, nominal Modulation rate≥ 1 kHz < 0.1%, nominal |
||
| Modulation Depth Range | 10% to 95% | ||
| Modulation Depth Accuracy | ±4%,nominal | ||
| FM Demodulation | Modulation Rate Range | 20Hz~100kHz | |
| Modulation Rate Accuracy | Modulation Rate < 1 kHz 1 Hz, nominal Modulation rate≥ 1 kHz < 0.1%, nominal |
||
| Modulation Deviations Range | 100Hz ~ 400kHz | ||
| Modulation Deviations Accuracy | ±4%, nominal | ||
| I/Q data | Maximum Real-time bandwidth | 40MHz | |
| Maximum storage depth | 500MB,I=Q=2Byte,RJ-45 LAN output | ||
| Product Model | RSA080/RSA200/RSA260 |
| Field Strength | Point frequency,Stepwise scanning,List scanning three measurement modes |
| Interference localization | Amplitude comparison direction finding,Interference tracking and Cross location Can copy and load maps |
| USB Power meter | Product Model:UP60 Frequency range:10MHz ~ 6GHz Amplitude range:-60dBm ~ +20dBm Amplitude accuracy:±0.5dB Maximum safe input level:+33dBm(2W,CW) |
| Advanced measurement kit | CHP,ACPR,OBW,Spectrogram,Audio Demo,Frequency Count,TOI,CNR,HD,Pass-Fail etc measurement |
| Input/Output | ||
| RF Input/Output | Type -N female,50Ω RF≤20GHz | |
| Type -2.92mm male(50Ω) RF>20GHz | ||
| USB | Host:USB 2.0 A plug,Dual interface | |
| LAN | 10/100 Base-T,RJ-45 Connectivity | |
| AF Output | FM/AM AF demodulation,3.5 mm mini jack | |
| REF IN | 10MHz,SMA female,Input level 0dBm to +10dBm | |
| IF OUT | 153.6MHz IF Signal, SMA female | |
| Trig In | External trigger input,3.3V/5V TTL, SMA female | |
| GPS | GPS/BD Antenna input,SMA female | |
| AUX | 8pin Aviation connectors,Directions antenna electronic compass | |
| DC IN | 20VDC Power adapter interface | |
| General data | ||
| Screen | 10.1 inches TFT-LCD,1280×800 | |
| Weight(include battery) | <3.9kg(Not contain VNA Options) | |
| Dimensions | 334(W)×242(H)×68(D)mm | |
| Operating Temperature | 0ºC ~ 50ºC | |
| Storage Temperature | -40ºC ~ 70ºC | |
| Lithium Battery | 14.8V 6400mAh | |
| AC/DC adapter | AC input | 100V~240VAC 50/60Hz 1.4A |
| Output | +20VDC 6A | |
| Power consumption | About 36W(RSA080) ,About 40W(RSA200/RSA260) | |
| Configuration | Designation | Model |
| Host of Spectrum analyzer (GPSA and RTSA) |
5kHz ~ 8GHz | RSA080 |
| 9kHz ~ 20GHz/26.5GHz | RSA200/RSA260 | |
| Accessory | CD-ROM(Users Guide) | |
| AC/DC adapter(AC input,+20V output) | ||
| N/SMA-JK adapter(1 piece) SMA-JJ Coaxial Cable (1 piece) |
||
| Options | Advanced measurement kit | RSA-AMK |
| High stability time base | RSA-OCXO | |
| Vector Network Analyzer | RSA080-VNA | |
| Distance To Fault | RSA080-DTF | |
| Vector Voltage Meter | RSA080-VVM | |
| GPS/BD Navigation(Contain GPS Antenna) | RSA-BD | |
| Field Strength | RSA-FS | |
| Emitter location | RSA-IL | |
| USB Power Sensor(10MHz~6GHz) | UP60 | |
| Analog Modulation Analysis(AM/FM) | RSA-AMA | |
| Omni-directional Antenna(300MHz~7.5GHz) | OA750 | |
| Directional Antenna(600MHz~8GHz) | DA800 | |
| Handheld Directional Antenna (9kHz~8000MHz) | SDA800 | |
| VNA Calibration Kit (4 piece SMA female,DC~9GHz) |
CK009 |
Ultra short wave handheld direction finding antenna (9kHz~8000MHz)
Other options
LNA010 broadband amplifier
When not using a direct power cord, it is necessary to ensure that the input voltage of the broadband amplifier is+5V. When using a direct power cord, it is necessary to ensure that the input voltage of the direct power cord is+5PLA030 Pulse limiter
The main function of a limiter is to limit the output signal amplitude to a certain range, which means that when the input amplitude exceeds a certain reference value, the output amplitude will be limited to a certain amplitude and will no longer change with the input voltage. The applicable frequency range is 50kHz~1GHz.
RFS003 Radio frequency switch
The applicable frequency range of the RF switch (RFS003) is 9kHz~300MHz. When the RF switch is turned off, the isolation degree is 34dB (minimum value). This RF switch is mainly used in conjunction with our company's limiter.
ANT01 Near-field probe
ANT01 is a cost-effective near-field probe primarily used to locate interference sources and determine the cause of interference. It can be used to detect the direction and strength of the magnetic field on the surface of the device
PRBI-400 Current injection probe
The current injection probe is mainly used for conducting sensitivity measurement; The interference signal is injected into the signal cable or power line of EUT to simulate external interference to determine the conduction sensitivity of EUT.
CDN016-M3 Coupling decoupling network
The coupling/decoupling network consists of two parts: coupling and decoupling.The main function of decoupling is to prevent useful signals from leaking to the power supply terminal (AE port) and to prevent disturbing signals from interfering with useful signals. The function of coupling is to transmit the disturbance signal of the device under test (EUT port) to the signal port.(RF port) in order to measure by measuring instruments, or transmit the electromagnetic disturbance signal of RF transmitter to the tested equipment.
VB30 vswr bridge
• Frequencyrange: 10MHz-3.6GHz
• Tested port: N (female) type
• IN-1o-DUTinsertion loss: 4dB (typical)
• Directionality: 24dB (typical)
• Maximum input power: +30dBm(lW)
• Applicable models: HSA800 series, SAi 000 series and SA2000 series
T/R1000 RF Demo Kit
• Radio frequency amplifier: The frequency range is 10MHz~2GHz,And the gain is 9dB~15d8(14dB@lGHz)
• Radio frequency band-pass filter: Bandwidth 920MHz-5MHz,Center frequency 922.5MHz
• Mixer: RF IN 5MHz~1500MHz
LO IN 5MHz~500MHz
RF OUT DC-1000MHz
• Oscillator LO/N:Frequency range 35MHz~4400MHz, Output power -3dBm--10dBm
•Oscillator LO:The frequency range is 2200MHz~4400MHz.,And the output power is 0dBm~+ 13dBm
• Variable gain amplifier:Frequency range 15MHz~30MHz, gainrange 0dB~30dB
• Intermediate band pass filter: Bandwidth19.9MHz~22.9MHz ,Center frequency 21.4MHz
• Reference timebase: 10MHz
•Interfuce:USB
FD100 frequency detection characteristic test module
• Based on BALUELEC Spectrum Analyzer, It can provide frequency discrimination
characteristic test function, Which can replace frequency scrumer
• Size 100mmx60mmx25mm
• Universal USB interfuce for easy control
• Weight≤200g
• Applicable models: SA1000 series and SA2000 series
DA800 directional broadband antenna
• Frequency measurement range: 600MHz-8000MHz
•Input impedance: 50Ω
• VSWR(Typical):<2:1
• Gain (Typical): 6dBi
• Weight: 400g
• Dimension: 353mrnx223mrnx28mrn
1. Beijing W&F technology Co.,LTD was founded in 2006.Which is located in Beijing- the capital of China. More than 15 years professional experience in fiber optic euqipments field makes us pay more attention to the quality.
2. Our brand ONEFIND are selling all over the world.
3. Life long technical support, quick feedback to any problem.
4. We can also provide OEM service.
5. "Satisfaction of the clients is service standard" --is our marketing service strate.
){kind=link}