| Type: | Cable and Antenna Analyzer |
|---|---|
| Wiring Devices: | Site Master |
| Condition: | New |
| Product Name: | Cable and Antenna Cable Tester |
| Frequency Range: | 1MHz-6000MHz |
| Frequency Resolution: | 1kHz |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 7 inch touch screen frequency up to 6GHz higher than Anritsu S331L WF-CAA-100B Site Master
WF-CAA-100 Cable and Antenna Analyzer is desinged for the wireless service application of instalation and maintenance. It can measure Return Loss, VSWR, Cable Loss, DTF Return Loss, DTF VSWR and deliver easy and quick result presentation.
Measurements:
| Model | WF-CAA-100B |
| Frequency Range | 1Mhz-6000MHz |
| Frequency Resolution | 1kHz |
| Frequency Accuracy | ±2.5ppm |
| Output Power | 0dBm(typ.) |
| Measurement Speed | 3.5ms/point |
| Data Points | 137, 251, 551, 1103 |
| Anti-jamming Capability | |
| Frequency | -5dBm |
| Channel | +17dBm |
| Directivity | 42dB (after calibration) |
| Return Loss | |
| Return Loss Range | 0 - 60 dB |
| Return Loss Resolution | 0.01dB |
| VSWR | |
| VSWR Range | 1 - 65 |
| VSWR Resolution | 0.01 |
| Cable Loss | |
| Cable Loss Range | 0 - 30dB |
| Cable Loss Resolution | 0.01dB |
| Distance-to-Fault | |
| Distance-to-Fault Return loss Range | 0 - 60 dB |
| Distance-to-Fault SWR Range | 1 - 65 |
| Measuring Length | 1500m |
| Resolution Ratio | ( 1.5×108 ) × (Vp) / (F2-F1) |
| Where Vp is the cable's relative propagation velocity. | |
| where F2 is the stop frequency and F1 is start frequency | |
| Data Points | 1.37E+12 |
| General Information | |
| Connector Type | N-Type female |
| Input Impedance | 50 Ohm |
| Display | 7 inch resistor touch screen, resolution 800×480 |
| Data Interface | One USB Host Port |
| One USB Device Port | |
| One 10M/100M Adaptive LAN Port | |
| Memory Space | >2000 traces |
| Internal Battery | 11.1V 7800mAh Rechargeable Lithium Battery |
| External Adapter | 110 - 240V, 50 - 60Hz, AC input; 16V, 3.75A, DC output |
| Operating Temp. Range | 10 - +50 °C |
| Storage Temp. Range | 40 - +70 |
| Humidity | 0 - 85% (Non-Condensing) |
| Weight | 2.5kg (Suttle) |
| Dimensions (L x W x H) | 290×175×75mm |
| TPM Module (Optional)--RF Terminal Power Meter | |
| Frequency Range | 50 - 4000MHz |
| Power Range | -40 - 20 dBm |
| Maximum Power | <23 dBm |
| Measure Uncertainty | ≤ +/-0.3dB (15 - 35) |
| ≤ +/-0.5dB( 0 - 50) | |
| Input VSWR | <1.2 |
| Burst Width | 1µs - 60ms |
| Min Repetition Period | 15Hz |
| Video Band | 5MHz |
| Minimum Pulse Width | 200ns |
| Time Resolution | 0.1µs,1µs,15µs,150µs |
| Peak Average Ratio | <12dB |
| CCDF Range | 0.1% - 100% |
| CCDF Uncertainty | ±3% |
| Duty cycle | 0.1% - 100% |
| Power Supply | USB |
| Operating Temp. Range | 0 - 50 |
| Storage Temp. Range | -20 - 70 |
| Humidity | 0 - 85% (Non-Condensing) |
| Weight | 0.3kg |
| Dimensions (L x W x H) | 105(125)×45×35mm |
| Anti-vibration properties | Conform to MIL-PRF-28800F class 3 |
| Elect. Compatibility Characteristics | Conform to EMC GB/T 18268-2000 |
| SPM Module(Optional)--In Line Digital Frequency Spectrum Power Meter | |
| Frequency Range | 400MHz - 4000MHz |
| Return Loss | 0 - 23dB |
| Max. Power | 57dBm |
| Input VSWR | <1.1 |
| Insertion Loss | ≤0.1dB |
| Directivity | ≥30 dB(<3GHz); ≥28 dB(>3GHz) |
| Operating Mode | Full Span/Arbitrary Span/Zero Span |
| Frequency Scanning Parameters(Full Span, Any Non-zero Span) | |
| Filter Bandwidth | 20M/300K optional |
| Scan Data Points | Max. 551 points |
| Frequency Measurement Resolution | 100KHz |
| Power Range | 10dBm - 57dBm |
| Power Measurement(Zero Span)Parameters | |
| Power Range | Average: 100mW - 200W or 20 - 53dBm |
| Peak: 100mW - 500W or 20 - 57dBm | |
| Peak-to-Average Ratio | <12dB |
| CCDF | 0.1 - 100% |
| Power Resolution | ±0.01 dBm |
| Power Accuracy(Zero Span) | ±0.5dB |
| Burst Signal Measurement Parameters | |
| Burst Width | 30µs - 100ms |
| Sampling Rate | 300K/30K/5K optional |
| Duty Cycle | 0.001 - 1 |
| Burst Average Power | 100mW - 200W or 20 - 53dBm |
| Others | |
| PC Interface | USB/RS-232 |
| RF Interface | N - Type female |
| Power Supply | USB Power supply: 5V, 500mA |
| Power Consumption | ≤ 2W |
| Operating Temp. Range | -20 - 50 |
| Storage Temp. Range | -20 - 70 |
| Humidity | 0 - 95%(Non-Condensing) |
| Weight | 490g |
| Dimensions (L x W x H) | 130 (95)×124×34mm |
1. Beijing W&F technology Co.,LTD is founded in 2006.We locate in Beijing- the capital of China. More than 15 years professional experience in fiber optic euqipments field makes us pay more attention to the quality.
2. Our brand ONEFIND are selling all over the world.
3. Life long technical support, quick feedback to any problem.
4. We can also provide OEM service.
5. "Satisfaction of the clients is service standard" --is our marketing service strate.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}