| Customization: | Available |
|---|---|
| Type: | Gigabit Ethernet Tester |
| Condition: | New |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The Ethernet test engine GT-20 provide a complete test for next generation Ethernet solution. There are many different test modules, it can help clients to verify the performance of their Ethernet. WF-GT-20 (used No. XGT-200 ) have two 10/100/1000Mb/s RJ45 , two 100/1000M SFP and two 10Gbps SFP+ it can generate test profession streams that you need and analyze them ,then provide the test result. XGT-200 provide install and maintain services and activate new profession service. XGT-200 can provide many kinds of test functions, it can help you to control and know the quality of your Ethernet.
Features:
Functions:
Specification :
|
SFP+(10G) |
|||
|
|
10G Base-SR/SW |
10G Base-LR/LW |
10G Base-ER/EW |
|
Wavelength (nm) |
850 |
1310 |
1550 |
|
Tx level(dBm) |
-5to-1 |
-8 to 0.5 |
-4.7 to 4.0 |
|
Rx level sensitivity(dBm) |
-11.1 |
-12.6 |
-14.1 |
|
Maximum reach |
300m |
10Km |
40Km |
|
Tx bit rate(Gbit/s) |
9.95 to 10.03 |
9.95 to 10.03 |
9.95 to 10.03 |
|
Rx bit rate(Gbit/s) |
9.95 to 10.03 |
9.95 to 10.03 |
9.95 to 10.03 |
|
Tx operation wavelength range(nm) |
840 to 860 |
1260 to 1355 |
1530 to 1565 |
|
Measurement accuracy |
|
|
|
|
Frequency (ppm) |
±4.6 |
±4.6 |
±4.6 |
|
Maximum rx before(dBm) |
6 |
5 |
5 |
|
Connector |
LC |
LC |
LC |
|
Transceiver type |
SFP+ |
SFP+ |
SFP+ |
|
RJ45 |
|||
|
|
Two ports:10/100 Base-T half/full duplex,1000 Base-T full duplex automatic or manual detection of straight/crossover cable |
||
1.What's the warranty for your products?
----Normally it is 1 years.
2.What's the lead time for all the goods that I required?
----About the 5-7 working days after getting payment.
3.What's your payment term?
----It is 100% T/T in advance or west-union.
4.What's the MOQ for your products?
----1pcs is okay.
5. How will you ship to us ?
----Normally it will takes 5-8 days by DHL or FedEx.
6. My fusion splicer machine always has a larger splice loss,what reasons caused it? How to solve?
----1).The electrodes are aging,you need to change new ones.
----2).The electrodes are not installed very well,you need to re-install and fix the electrodes well.
----3).Discharging current is not good,you need to do discharging experiment to make the current get the right point.
7.Splicing machine shows loss is not large,but it's larger when testing use a OTDR,what causes?How solve?
----1).The electrodes are aging,you need to change new ones.
----2).Discharging current is not good,you need to do discharging experiment to make the current get the right point.
----3).Optical fiber end face is bad,there is something wrong with the cutting blades.You need to adjust the fiber cleaver & cutting blades to make sure end face is better.
----4).There has dust in V groove,you need to clean V groove,microscope,electrodes etc.
){kind=link}